You are here: Home Laboratory Incubators Precision Incubator LEEC Precision Incubator
Share |

LEEC Precision Incubator

LEEC Precision Incubator

Class Leading Design & Technology

Features

* Ideal for use at 37.0°C

* Large storage capacity

* Microprocessor temperature controller

* Fan assisted

* Over temperature protection

* Stainless steel chamber and shelves

* Lockable castors / wheels

* Inner glass doors

The LEEC P33 Precision Incubator combines traditional styling and modern controls for precise temperature control in a large capacity stainless steel chamber (730 litres).

Note: models P2 and P3 have been replaced by equivalent models from the Classic Incubator range

 

CONSTRUCTION

LEEC P33 Precision Incubator has a large capacity 730 litre stainless steel chamber, adjustable stainless steel shelves and 4 toughened glass viewing doors. The outer cabinet is rust-resistant and finished in white polyester powder coat paint with anti-microbial properties. Two 12mm access ports are provided so that cables for shakers and/or monitoring probes can be passed safely into the incubator.

HEATING

The heating system consists of low wattage electrical elements which are specially designed and profiled to eliminate hot spots around the chamber. Expanding polyurethane insulation is foamed in-situ to give excellent thermal retention, and it ensures optimum temperature control and stability. The P33 is a heat-only incubator. Operation of the incubator at (or below) room temperature requires a source of chilled water (e.g. a LEEC self contained recirculating cooler unit). All LEEC Precision Incubators (models P2, P3, P33) regardless of their age, can cool when connected to a LEEC Self Contained Recirculating Cooler Unit.

TEMPERATURE CONTROL

The P33 gentle fan-assisted air circulation via a full-width duct to ensure optimum temperature stability throughout the chamber. When the incubator door is opened, the fan stops so that any heat is kept to a minimum.

The microprocessor PID temperature controller maintains the set temperature to within 0.1°C. The easy to use temperature controller shows both 'set' and 'measured' values. Indicators show when the heater is active and if an over temperature condition exists.

OVER TEMPERATURE PROTECTION AS STANDARD

An independent digital over temperature safety cut out system is included as standard. This protects the items being incubated inside the chamber from accidental over temperature situations. The cut out limit can be easily adjusted by the end user.

SPECIFICATION
MODEL P33
Temperature Range

5° above ambient to +60°C

Temperature Control

Typically ±0.1°C at 37°C

Temperature Variation ±1.0°C
Tempearture Recovery Time Approx. 6 minutes
Castors Yes (lockable)

Chamber Capacity (Litres)

730

External Dimensions (H x W x D mm)

Internal Dimensions (H x W x D mm)

1550 x 1270 x 660

1275 x 1140 x 490

Shelves Included 6
Weight (Kg) 225
Power Rating (watts) 600

 

This is a heat only incubator. Control near (or below) ambient temperature requires a LEEC recirculating cooler unit.

 

 

Every LEEC Incubator is made to order to meet the exacting needs of every customer.  LEEC prides itself on being able to deliver exactly what the customer wants and relishes the challenge of producing a Incubator that is tailored to every specific customer need.

Below are the Options which are available on the LEEC Precision Cooled Incubator range.  Please be aware that LEEC will endeavour to meet every customer requirement request.

Please do contact us for more information.

Standard Options

 

  • DDR Digital Data Recorder
  • Additional shelf and runners
  • Internal power point, 13A UK type (factory fitted)
Register your product